Having problems with your washing machine because the drain hose does not drain? This is one of the most common washing machine problems one can encounter whenever the washer breaks down. Many factors can cause this breakage and age is one of them.
If your washing machine continues to fill itself with water and you can hear the sound of the motor, then it indicates that the washer belt is still functioning properly.
Whenever a drain hose stopped working Washer Repair Los Angeles, there are only two reasons – either the drain hose is faulty or the pump in the washing machine has gone something wrong. In this article, we will share with you what you can do to fix this problem.
You need to inspect the washing machine lid to find out whether is broken. You can make use of a pencil or a long pointed object to poke against the lid button.
Check whether the hose is attached to the pipe hole. If that is the case, unattached it.
Choose a replacement hose. Two main types of hose are available. You can either choose the reinforced rubber or the sturdier and newer type – stainless-steel reinforced.
Turn off the source of the water supply. Remember to unplug the electrical plug for safety reason. There are 3 hoses and you need to disconnect them to do the replacement. You need a monkey wrench tool, pipe wrench and a normal plier to help do the job here. Be careful of the water dripping from these hoses.
After you have removed the hose from the washing machine, it’s time to replace the old with the new hose. This is a much easier step. Apply a little grease on the faucet and connector and make sure the rubber fits in directly into the hose connector. Complete the job with the hose connector. Take note to not avoid twisting the hose when you setup for new hose. Try to leave some gap behind the washer and wall for the hose.